Intex Pool Drain Pump 28606

Product Information

For those who need to practice partial drains for fiberglass or in-ground vinyl pools, always complete the process by removing 1/3 of the water at a time. That may not sound like a big deal to you, but it is to me because my pool holds 22,000 gallons of water, and I imagined the mess that would make. This protects the pool from popping out of the ground. Some finishes like plaster may be covering the valves. This will require you to use a hammer and chisel to remove plaster so you can unscrew the valves.

Now that your pump is set to ‘drain’, switch it on and let the magic happen. Remember to keep an eye on the pool’s water level. You don’t want your pump to run dry; that’s about as much fun as belly-flopping from a high dive. Step 4: Monitor and Stop the Pump Step 1: Take the hose and submerge it into your pool completely, both ends must be in the water and the hose needs to be filled.Pool pop is the worst thing that can happen when pool owners drain inground pools. A pool pop is when the bottom layer of your pool comes floating up to the surface, usually due to high pressure or overloading. Attach enough garden hose to get from the pool to the drain point (sewer cleanout line, the road, downhill, or wherever else you’re legally allowed to discharge water). Step 4: The suction created will keep the water running from the pool to the outside as long as the end inside the pool stays submerged.

I assure you that following these procedures will make draining a pool using the pool pump less difficult than peeling a banana. Always keep in mind that it all comes down to knowing how your pump moves rhythmically and having the guts to take the lead. Pool maintenance 101 takes time to learn and can seem a bit daunting in the beginning. However, the more you get the hang of it, the more you can avoid large repairs that require you to drain your pool. Draining a pool should always be a last resort, so be absolutely certain you’ve exhausted all avenues when it comes to water balancing or repairing broken areas of the pool. To empty an above ground, easy set-up swimming pool such as the Intex without using a submersible pump, follow these steps:If you leave your pool uncovered and empty in the sun, the lining could be damaged. The lining could also be damaged by mold and bacteria growth. It is important to treat your pool if you plan on removing the water. Will a Pool Lose Its Shape if It Is Left Empty for Long Periods of Time? In areas where temperatures routinely drop below 41 degrees, draining some water as part of passive winterization will help protect the structure, pipes and equipment from freeze damage. It also prevents the potential for overflow should the pool water freeze and expand. How To Drain an In-Ground Pool The National Swimming Pool Foundation advises pool owners not to empty their pools. If you do not have enough water, the bad weather can lift the pool out of the ground—the water assists in “holding down” your pool. Step 7: Remove the Pool’s Pump Motor

Sun Damage Water helps protect the liner of your pool. If the pool does not have water in it, the liner becomes prone to damage and warping caused by the suns UV rays. Before you make a move, you need to make sure you’re on the right side of the law. Some localities have specific regulations about where the drained water can go. Step 2: Set up Your Pump for DrainingThis task is a little easier for above ground and Intex pools. But for inground pools, you have other things to consider to avoid the dreaded pool pop.